Description
[shortdesc]
- 802.11ac Wave 2 Access Point
- 4x4:4
- External-Ant
- B Regulatory Domain
- Configurable
[specifications]
Software | Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points |
Deployment modes | Centralized local. Standalone. Sniffer. Cisco FlexConnect. Monitor. OfficeExtend. Mesh |
Supported wireless LAN controllers | Cisco 2500 Series Wireless Controllers. Cisco Wireless Controller Module for ISR G2. Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches. Cisco 5500 Series Wireless Controllers. Cisco Flex 7500 Series Wireless Controllers. Cisco 8500 Series Wireless Controllers. Cisco 5760 Series Wireless Controllers. Cisco Catalyst 3650/3850 Series switch with integrated controllerCisco Mobility Express |
802.11n version 2.0 (and related) capabilities | 4x4 MIMO with four spatial streamsMaximal ratio combining (MRC)20- and 40-MHz channels PHY data rates up to 600 Mbps (40 MHz with 5 GHz)Packet aggregation: A-MPDU (Tx/Rx). A-MSDU (Tx/Rx)802.11 dynamic frequency selection (DFS)Cyclic shift diversity (CSD) support |
802.11ac Wave 1 and 2 capabilities | 4x4 MIMO with four spatial streams. single-user MIMO4x4 MIMO with three spatial streams. multiuser MIMOMRC802.11ac beamforming (transmit beamforming)20-. 40-. and 80-MHz channels PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz)Packet aggregation: A-MPDU (Tx/Rx). A-MSDU (Tx/Rx)802.11 DFSCSD support rogue device detection |
Integrated antenna | 2.4 GHz. gain 3 dBi. internal omni. horizontal beamwidth 360 5 GHz. gain 5 dBi. internal omni. horizontal beamwidth 360 |
External antenna (sold separately) | Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)Cisco offers the industry's broadest selection of antennas. delivering optimal coverage for a variety of deployment scenarios |
Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45). Power over Ethernet (PoE)1 x 10/100/1000BASE-T autosensing (RJ-45). AUX (used for Link Aggregation)Management console port (RJ-45)USB 2.0 (enabled via future software) |
Indicators | Status LED indicates boot loader status. association status. operating status. boot loader warnings. boot loader errors |
Dimensions (W x L x H) |
Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
Weight | 3.12 lb (1.41 kg) |
Environmental | Cisco Aironet 1850e Nonoperating (storage) temperature: -22 to 158 F (-30 to 70 C)Nonoperating (storage) altitude test: 25 C. 15.000 ft.Operating temperature: -4 to 122 F (-20 to 50 C)Operating humidity: 10% to 90% (noncondensing)Operating altitude test: 40 C. 9843 ft. |
System memory | 1 GB DRAM256 MB flash |
Input power requirements | AP1850: 44 to 57 VDC power supply and power injector: 100 to 240 VAC; 50 to 60 Hz |
Power draw | 20.9W Note: When deployed using a Power over Ethernet (PoE) specification. the power drawn from the power sourcing equipment will be higher by some amount. depending on the length of the interconnecting cable. |
Powering options | 802.3atEnhanced PoECisco power injector. AIR-PWRINJ4=Cisco local power supply. AIR-PWR-C=Cisco power injector. AIR-PWRINJ5= (Note: this injector supports 802.3af only)802.3af Note: If 802.3af PoE is the source of power. (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4. (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e. |
[/specifications]AIR-AP1852E-B-K9C is one of the Cisco Aironet 1850 Series Access Points. Cisco 1850 AP series is ideal for small and medium-sized networks. This series supports enterprise-class 4x4 MIMO. four-spatial-stream Access Points that support the IEEE's new 802.11ac Wave 2 specification. The 1850 Series extends support to a new generation of Wi-Fi clients. such as smartphones. tablets. and high-performance laptops that have integrated 802.11ac Wave 2 support. The model AIR-AP1852E-B-K9C provides B Regulatory Domain and External antennas. Model number ending in C is. by default. factory-shipped with a Cisco Mobility Express software image.
Cisco AIR-AP1852E-B-K9C Access Point Overview
Description | 802.11ac Wave 2 Access Point. 4x4:4. External-Ant. B Regulatory Domain |
Features | - 4x4 MIMO with four spatial streams. single-user MIMO - 4x4 MIMO with three spatial streams. multiuser MIMO - MRC - 802.11ac beamforming (transmit beamforming) - 20-. 40-. and 80-MHz channels - PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx). A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
Regulatory Domain | B (B regulatory domain): - 2.412 to 2.462 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.500 to 5.720 GHz; 12 channels - 5.745 to 5.825 GHz; 5 channels |
Antenna | External Antenna |
Interfaces | - 1 x 10/100/1000BASE-T autosensing (RJ-45). Power over Ethernet (PoE) - 1 x 10/100/1000BASE-T autosensing (RJ-45). AUX (used for Link Aggregation) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
Dimensions (W x L x H) | 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) |
Weight | 3.12 lb (1.41 kg) |