/
Description
The Catalyst 6500 48-port 10/100 Fabric-enabled Fast Ethernet RJ-45 module is designed for distribution and core switches. as well as switches located in server farms and data centers.
WS-X6548-RJ-45= Product Overview
- Application/Usage: Switching Network
Technical Information
- Interfaces/Ports: 48 x 10/100Base-TX LAN
- Interfaces/Ports Details: 48 x RJ-45 Female 10/100Base-TX LAN
Interfaces/Ports
- Connectivity Media: Category 5 UTP
- Connectivity Media: Category 5e UTP
- Connectivity Media: Category 6 UTP
- Connectivity Media: 100 ohm STP
- Distance Supported: 328 ft Category 5 UTP Full-duplex
- Distance Supported: 328 ft Category 5e UTP Full-duplex
- Distance Supported: 328 ft Category 6 UTP Full-duplex
- Distance Supported: 328 ft 100 ohm STP Full-duplex
- Data Transfer Rate: 10 Mbps Ethernet Half/Full-duplex
- Data Transfer Rate: 100 Mbps Fast Ethernet Half/Full-duplex
Media & Performance
- Management: Network Management:
- ETHERLIKE-MIB (RFC 1643)
- IF-MIB (RFC 1573)
- Bridge MIB (RFC 1493)
- CISCO-STACK-MIB
- CISCO-VTP-MIB
- CISCO-CDP-MIB
- RMON MIB (RFC 1757)
- CISCO-PAGP-MIB
- CISCO-STP-Extensions-MIB
- CISCO-VLAN-Bridge-MIB
- CISCO-VLAN-Membership-MIB
- CISCO-UDLDP-MIB
- CISCO-ENTITY-FRU-CONTROL-MIB
- CISCO-COPS-CLIENT-MIB
- ENTITY-MIB (RFC 2037)
- HC-RMON
- RFC1213-MIB (MIB-II)
- SMON-MIB
- Protocols: TCP/IP
- Protocols: STP
Management & Protocols
- Memory: 1 MB Buffer Memory Per Port Installed
Memory
- Status Indicators:
- Status
- Link good
Controls/Indicators
- Temperature:
- Temperature:
- Humidity: 10% to 90% Non-condensing Relative Humidity
- Altitude: -196.84 ft to 13123.32 ft Operating
Environmental Conditions
- Dimensions: 1.2' Height x 14.4' Width x 16.0' Depth
Physical Characteristics
- Additional Information:
- Module is auto-MDI/MDIX capable
- Can use either straight or crossover cable. and the module will automatically detect and adjust for the cable type
- The QoS port architecture (Rx/Tx) for this module is 1p1q0t/1p3q1t
- Backplane Connection: Switch fabric. bus
- Forwarding: Centralized; support for Distributed Cisco Express Forwarding (dCEF) with optional daughter card
- Inline Power: No
- Scheduler: Deficit Weighted Round Robin (DWRR)
- Primary Applications: Server Farm
- Optional AFC Upgrade Requirements: Not supported
Forwarding Engine Architecture: - Centralized CEF engine located on supervisor's PFCx makes forwarding decision
- Upgradeable to dCEF switching with optional WS-F6K-DFC or WS-F6K-DFC3
Performance/ Forwarding Rate (Mpps): - 256 Gbps using CEF: - Up to 30 Mpps per system
- Using dCEF upgrade: up to 15 Mpps per slot for slots equipped with DFC or DFC3 to support distributed forwarding
Optional DFC Upgrade Requirements: - Use WS-F6K-DFC with Supervisor Engine 2 and SFM(2)
- Use WS-F6K-DFC3 with Supervisor Engine 720
Maximum Port Density / Chassis: - Cisco Catalyst 6513: up to 576 ports
- Cisco Catalyst 6509: up to 384 ports
- System Requirements: Slot Requirements:
- Any slot in any chassis
- Compatibility:
- Cisco Catalyst 6500 Series
Supervisor Engine Supported: - Supervisor Engine 1A
- Supervisor Engine 2
- Supervisor Engine 720
- Certifications & Standards: Standard Network Protocols:
- Ethernet: IEEE 802.3. 10BASE-T
- Fast Ethernet: IEEE 802.3. 100BASE-TX. and 100BASE-FX
- IEEE 802.1d. IEEE 802.1p. IEEE 802.1q. IEEE 802.1s. IEEE 802.1w. IEEE 802.3x. IEEE 802.3z. IEEE 802.3ab. IEEE 802.3ad
Safety Compliance: - UL 1950
- CSA-C22.2 No. 950
- EN 60950
- IEC 950
- AS/NZS 3260
- IEC 825
- EN 60825
- 21CFR1040
EMC Compliance: - FCC Part 15 (CFR 47) Class A
- VCCI Class A with UTP. Class B with STP
- EN55022 Class A with UTP. Class B with STP
- CISPR 22 Class A with UTP. Class B with STP
- CE marking
- AS/NZS 3548 Class A with UTP. Class B with STP
Miscellaneous
- Limited Warranty: 90
