Description
Overview
The Crestron HD-MD-400-C-E Auto-Switcher & Extender delivers an incredibly simple and cost-effective multimedia presentation solution for classrooms and meeting spaces. It allows a laptop or mobile device (HDMI or VGA) to be connected to one of three inputs at a table or podium. and routes the signal to a display or projector up to 230 feet (70 meters) away. An additional HDMI source can be connected at the display device location (or through an optional wall plate near the display). Fully automatic operation detects when a source is connected or disconnected at any input and turns the display on and off. alleviating the need for any control panels or remotes. Built-in scaling ensures an optimal video image for SD and HD video signals. as well as for high-res computer signals.
Specifications
Model Number: HD-MD-400-C-E
Brand: Crestron
Alt Part Number(s): HD-MD-400-C-E
Product Type: Auto-Switcher & Extender
Technical Description
Brand: Crestron
Model Number: HD-MD-400-C-E
Video Switcher: 3x1+1 (3 inputs at transmitter + 1 input at receiver) manual or auto-switching. audio-follow-video. Crestron QuickSwitch HD technology
Scaler: HD video scaler and deinterlacer. noise reduction. 3:2/2:2 pull-down detection and recovery. aspect ratio selection. VGA phase/clock & H/V position adjustments. picture and RGB color adjustments
Input Signal Types: HDMI w/Deep Color (DVI & Dual-Mode DisplayPort compatible [3]); VGA/RGB (RGBHV. RGBS. RGsB); component (YPbPr)
Output Signal Types: HDMI w/Deep Color (DVI compatible
Resolution HDMI: 1920x1200 WUXGA .1920x1080 HD 1080p
Resolution VGA/RGB: 1600x1200 UXGA. 1920x1200 WUXGA
Audio Input Signal Types: HDMI (Dual-Mode DisplayPort compatible). analog stereo
Output Signal Types: HDMI. analog stereo
Digital Formats: Dolby Digital. Dolby Digital EX. DTS. DTS ES. DTS 96/24. LPCM up to 8 channels
Analog Formats: Stereo 2-channel
Analog-To-Digital Conversion: 24-bit 48 kHz
Digital-To-Analog Conversion: 24-bit 48 kHz
Analog Output Volume: -80 to +20 dB Level adjustment range. plus Mute
Communications Ethernet: 10/100 Mbps. auto-switching. auto-negotiating. auto-discovery. full/half duplex. DHCP. web browser setup and control. Crestron control system integration
USB: Supports a TT-100 series cable caddy at the transmitter
Connectors at Transmitter (HD-TX-301-C-E)
HDMI 1 – 2 INPUT: HDMI Type A connectors. female; HDMI digital video/audio inputs (DVI & Dual-Mode DisplayPort compatible
VGA 3 INPUT: HD15 connector. female;RGB (VGA) or component video input; Formats: RGBHV. RGBS. RGsB. YPbPr
AUDIO INPUT: 3.5 mm TRS mini phone jack; Unbalanced stereo line-level audio input; Maximum Input Level: 2 Vrms; Input Impedance: 44k Ohms
Connectors at Receiver (HD-RX-201-C-E)
HDMI. INPUT 1: HDMI Type A connector. female; HDMI digital video/audio input (DVI & Dual-Mode DisplayPort compatible)
FROM TX. INPUT 2: 8-pin RJ45 connector. female. shielded;Link port for connection to HD-TX-301-C-E transmitter;Maximum cable length: 230 ft (70 m)
HDMI OUTPUT: HDMI Type A connector. female; HDMI digital video/audio output (DVI compatible
Controls & Indicators at Transmitter (HD-TX-301-C-E)
TO RX: LEDs (on RJ45 connector). green LED indicates DM Lite link status. amber LED indicates a valid video signal
PWR: Bi-color green/amber LED. indicates operating power is supplied from the power pack via the 24VDC input or from the RX via the DM Lite link. turns amber while booting and green when operating
Controls & Indicators at Receiver (HD-RX-201-C-E)
FROM TX. INPUT 2: LEDs (on RJ45 connector). green LED indicates DM Lite link status. amber LED indicates a valid video signal
LAN: LEDs (on RJ45 connector). green LED indicates Ethernet link status. amber LED indicates Ethernet activity
Output Voltage: 208 - 230 V AC
Protocols: Web. SNMP. Telnet
*Product descriptions. images. and part numbers are subject to change and may not accurately reflect manufacturer product alterations. For the latest and most precise information. kindly refer to the manufacturer's website and use the item's manufacturer part number.
