/
Description
The LP9802 PCI-X host bus adapter offers a highly integrated 2Gbps Fibre Channel HBA for use in servers based on either PCI or the latest PCI-X expansion bus. The LP9802 delivers exceptional performance through the use of an Emulex Pegasus ASIC. a 266MIPs onboard processor. an embedded 1Gig/2Gig SERDES. and a high performance unified QDR SRAM. The LP9802 features automatic topology detection and automatic topology detection and automatic speed negotiation capability. These capabilities allow complete compatibility with existing 1Gb/s Fibre Channel SANs. while allowing seamless upgrades to higher speed 2Gbps SANs.
lp9802f2 Product Overview
- Ports/Channels: 1 x LC Fibre Channel
- Host Interface: PCI-X 133 MHz
- Host Interface: PCI-X 100 MHz
- Host Interface: PCI-X 66 MHz
- Backward Compatibility: PCI 66 MHz 64-bit
- Backward Compatibility: PCI 33 MHz 32-bit
- Fabric Supported: FL_Port
- Fabric Supported: F_Port
- Topology: Arbitrated Loop
- Fibre Channel Class Supported: Class 2
- Fibre Channel Class Supported: Class 3
Technical Information
- Connectivity Media: 50/125 µm Multi-mode Optical Fiber Fibre Channel
- Connectivity Media: 62.5/125 µm Multi-mode
- Data Transfer Rate: 1.06 Gbps
- Data Transfer Rate: 2.13 Gbps Full-duplex
- Data Throughput: 3.13 Gbps Fibre Channel Full-duplex
- Distance Supported: 1640.42 ft 50/125 µm Multi-mode Optical Fiber @ 1 Gbps
- Distance Supported: 984.25 ft 62.5/125 µm Multi-mode Optical Fiber @ 1 Gbps
- Distance Supported: 984.25 ft 50/125 µm Multi-mode Optical Fiber @ 2 Gbps
- Distance Supported: 492.13 ft 62.5/125 µm Multi-mode Optical Fiber @ 2 Gbps
Media & Performance
- Protocols: SCSI
- Protocols: TCP/IP
- Protocols: FC-Tape
- Protocols: FC-FS
- Protocols: FC-PH
- Protocols: FC-PI
- Protocols: FC-AL
- Protocols: FC-PLDA
- Protocols: FC-MI
- Protocols: FC-FLA
- Management:
- Most drivers include a full-featured implementation of the FC-MI HBA Management Interface.
Management & Protocols
- Standard Memory: 2 MB Flash
- Standard Memory: 2 MB QDR
Memory
- Input Voltage: 3.3 V DC 5%
- Power Consumption: 7.70 W @ 66 MHz
- Power Consumption: 8.50 W Typical @ 133 MHz
Power Description
- Temperature:
- Temperature:
- Humidity: 5% to 95% Non-condensing Relative Humidity
Environmental Conditions
- Form Factor: Low-profile MD2 Hot-swappable
- Height: 2.5'
- Width: 6.6'
Physical Characteristics
- Additional Information:
- Automatic speed negotiation
- Automatic topology detection
- Onboard hardware context cache for superior fabric performance
- Support for multiple concurrent protocols
- Full fabric boot support in x86 and SPARC environments to multiple LUNs
- End-to-end parity protection for high data integrity
- Buffered data architecture to support over 50km cabling at full 2Gbps bandwidth
- Emulex Pegasus ASIC technology
- 266MIPs onboard processor
- Embedded 1Gig/2Gig SERDES
- Airflow required: 100 lf/m
- LUN Masking
- LUN Mapping
- Persistent Binding
- I/O Coalescing
- Compatibility: Software Environments:
- Windows Server 2003
- Windows 2000
- Windows NT
- HP-UX
- Linux
- NetWare
- Solaris
- x86
- SPARC
- PowerPC
- Certifications & Standards:
- PCI-X 1.0a
- PCI local bus revision 2.2
- Class 1 Laser Product per DHHS 21CFR (J) & EN60825
- UL recognized to UL 1950
- CUR recognized to CSA22.2. No. 950
- TUV certified to EN60950
- FCC rules. Part 15. Class A
- ICES-003. Class A
- EMC Directive 89/336/EEC (CE Mark)
- EN55022. Class A
- EN55024
- Australian EMC Framework (C-Tick Mark)
- AS/NZS 3548. Class A
- VCCI. Class A
Miscellaneous
Software Features:
Hardware Environments:
Agency Approvals:
- Limited Warranty: 3 Year
