Overview
The 4-channel NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room. the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT’s PVD™ transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load. miswires. or fault conditions at a glance. Automatic-reset fault protection. transient protection. and ground loop free individually floating outputs.
Specifications
Model Number: NV-4PS13-PVD
Brand: Network Video Technologies
Alt Part Number(s): NV-4PS13-PVD
Product Type: Passive Receiver Hub
Technical Description
Brand: Network Video Technologies
Model: NV-4PS13-PVD
Input Voltage: 24 V AC
Output Voltage: 28 V AC
Operating Humidity %: 0 ~ 95
Output Voltage: 208 - 230 V AC
Protocols: Web. SNMP. Telnet
Features
Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
Automatic-reset fault protection; transient protection
Frequency Response DC to 10 MHz
Individually floating outputs ensure total ground-loop immunity
Diagnostic LEDs show load/no load. miswires. and overload conditions
Use with the NV-216A-PV. NV-218A-PVD or the NV-226J-PV transceiver at the camera
Power cameras via UTP over significant distances (see Power Distance Calculator)
1U high x 8” deep wall. desk or desk rack-mountable
*Product descriptions. images. and part numbers are subject to change and may not accurately reflect manufacturer product alterations. For the latest and most precise information. kindly refer to the manufacturer's website and use the item's manufacturer part number.
