/
Description
Teltonika 4G/LTE CAT6 WiFi Industrial Cellular Router (RUT360)
RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular. Wi-Fi. and wired networks.
RUT360 is equipped with two Ethernet interfaces. 802.11 b/g/n WiFi. and 4G LTE Cat 6 cellular module. offering data speeds up to 300 Mbps.
Unique programming. remote monitoring. and security features make RUT360 perfect for IoT and M2M applications. where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited.
FEATURES:
| MOBILE | |
| Mobile module | 4G (LTE) – Cat 6 up to 300 Mbps. 3G – Up to 42 Mbps |
| Status | Signal strength. SINR. RSRP. RSRQ. Bytes sent/received. connected band. carrier aggregation. IMSI. ICCID |
| SMS | SMS status. SMS configuration. send/read SMS via HTTP POST/GET. Email to SMS. SMS to Email. SMS to HTTP. SMS to SMS. SMS auto reply |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/Whiles list (planned) | Operator black/white list |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock. Used band status display |
| APN | Auto APN |
| Bridge mode | Direct connection (bridge) between mobile ISP and device on LAN |
| WIRELESS | |
| Wireless mode | 802.11 b/g/n. 2x2 MIMO. Access Point (AP). Station (STA) |
| WiFi security | WPA3-EAP. WPA3-SAE. WPA2-Enterprise-PEAP. WPA2-PSK. WEP; AES-CCMP. TKIP. Auto Cipher modes. client separation |
| ESSID | ESSID stealth mode |
| Wireless Hotspot | Captive portal (Hotspot). internal/external Radius server. SMS OTP. MAC auth. built in customizable landing page. walled garden |
| ETHERNET | |
| WAN | 1 x WAN port (can be configured as LAN) 10/100 Mbps. compliance with IEEE 802.3. IEEE 802.3u standards. supports auto MDI/MDIX crossover |
| LAN | 1 x LAN ports. 10/100 Mbps. compliance with IEEE 802.3. IEEE 802.3u standards. supports auto MDI/MDIX crossover |
| NETWORK | |
| Routing | Static routes. Dynamic routes |
| Network protocols | TCP. UDP. IPv4. IPv6. ICMP. NTP. DNS. HTTP. HTTPS. FTP. SMTP. SSL v3. TLS. ARP. VRRP. PPP. PPPoE. UPNP. SSH. DHCP. Telnet client. SNMP. MQTT. Wake on LAN (WOL) |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers. allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot. Wget reboot. Periodic Reboot. LCP and ICMP for link inspection |
| Firewall | Port forwards. traffic rules. NAT rules. custom rules |
| DHCP | Static and dynamic IP allocation. DHCP Relay. Relayd |
| QoS / Smart Queue Management (SQM) () | Traffic priority queuing by source/destination. service. protocol or port. WMM. 802.11e |
| DDNS | Supported >25 service providers. others can be configured manually |
| Network backup | Mobile. Wired and WiFi WAN options. each of which can be used as an automatic Failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| SECURITY | |
| Authentication | Pre-shared key. digital certificates. X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via WebUI. unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
| Attack prevention | DDOS prevention (SYN flood protection. SSH attack prevention. HTTP/HTTPS attack prevention). port scan prevention (SYN-FIN. SYN-RST. X-mas. NULL flags. FIN scan attacks) |
| VLAN | Tag based VLAN separation |
| Mobile quota control | Custom data limits for both SIM cards |
| WEB filter | Blacklist for blocking out unwanted websites. Whitelist for specifying allowed sites only |
| Access control | Flexible access control of TCP. UDP. ICMP packets. MAC address filter |
| VPN | |
| OpenVPN | Multiple clients and a server can run simultaneously. 12 encryption methods |
| OpenVPN Encryption | DES-CBC. RC2-CBC. DES-EDE-CBC. DES-EDE3-CBC. DESX-CBC. BF-CBC. RC2-40-CBC. CAST5-CBC. RC2-64-CBC. AES-128-CBC. AES-192-CBC. AES-256-CBC |
| IPSec | IKEv1. IKEv2. with 5 encryption methods for IPsec (DES. 3DES. AES128. AES192. AES256) |
| GRE | GRE tunnel |
| PPTP. L2TP | Client/Server instances can run simultaneously. L2TPv3 support |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
| DMVPN | Method of building scalable IPsec VPNs |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| MODBUS | |
| MODBUS TCP SLAVE | |
| ID filtering | Respond to one ID in range [1;255] or any |
| Allow remote access | Allow access through WAN |
| Custom registers | Modbus TCP custom register block. which allows to read/write to a file inside the router. and can be used to extend Modbus TCP slave functionality |
| MODBUS TCP MASTER | |
| Supported functions | 01. 02. 03. 04. 05. 06. 15. 16 |
| Supported data formats | 8 bit: INT. UINT; 16 bit: INT. UINT (MSB or LSB first); 32 bit: float. INT. UINT (ABCD (big-endian). DCBA (little-endian). CDAB. BADC). HEX. ASCII |
| MQTT GATEWAY | |
| Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker |
| DNP3 | |
| Supported modes | TCP Master. DNP3 Outstation |
| DATA TO SERVER | |
| Protocols | HTTP(S). MQTT. Azure MQTT. Kinesis |
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS. status. configuration. FW update. CLI. troubleshoot. event log. system log. kernel log |
| FOTA | Firmware update from server. automatic notification |
| SSH | SSH (v1. v2) |
| SMS | SMS status. SMS configuration. send/read SMS via HTTP POST/GET |
| Call | Reboot. Status. Mobile data on/off. Output on/off |
| MQTT | MQTT Broker. MQTT publisher |
| SNMP | SNMP (v1. v2. v3). SNMP trap |
| JSON-RPC | Management API over HTTP/HTTPS |
| Modbus | Modbus TCP status/control |
| RMS | Teltonika Remote Management System (RMS) |
| IoT PLATFORMS | |
| Clouds of things | Allows monitoring of: Device data. Mobile data. Network info. Availability |
| ThingWorx | Allows monitoring of: WAN Type. WAN IP. Mobile Operator Name. Mobile Signal Strength. Mobile Network Type |
| Cumulocity | Allows monitoring of: Device Model. Revision and Serial Number. Mobile Cell ID. ICCID. IMEI. Connection Type. Operator. Signal Strength. WAN Type and IP |
| Azure IoT Hub | Can send device IP. Number of bytes send/received. Mobile connection state. Network link state. IMEI. ICCID. Model. Manufacturer. Serial. Revision. IMSI. SIM State. PIN state. GSM signal. WCDMA RSCP. WCDMA EC/IO. LTE RSRP. LTE SINR. LTE RSRQ. CELL ID. Operator. Operator number. Connection type. Temperature. PIN count to Azure IoT Hub server |
| SYSTEM CHARACTERISTICS | |
| CPU | QCA9531. MIPS 24kc. 650 MHz |
| RAM | 128 MB. DDR2 |
| FLASH storage | 16 MB. SPI Flash (optional up to 256 MB) |
| FIRMWARE / CONFIGURATION | |
| WEB UI | Update FW from file. check FW on server. configuration profiles. configuration backup |
| FOTA | Update FW/configuration from server |
| RMS | Update FW/configuration for multiple devices at once |
| Keep settings | Update FW without losing current configuration |
| INPUT/OUTPUT | |
| Configurable I/O | 2 x Configurable digital Inputs/Outputs. Digital input 0 - 5 V detected as logic low. 8 - 30 V detected as logic high. Open collector output. max output 30 V. 300 mA |
| Events | SMS. Email. RMS |
| I/O juggler | Allows to set certain I/O conditions to initiate event |
| POWER | |
| Connector | 4 pin industrial DC power socket |
| Input voltage range | 9 - 30 VDC. reverse polarity protection. voltage surge/transient protection |
| Power consumption | 10.5 W max |
| PHYSICAL INTERFACES (PORTS. LEDS. ANTENNAS. BUTTONS. SIM) | |
| Ethernet | 2 x RJ45 ports. 10/100 Mbps |
| I/Os | 2 x Configurable digital Inputs/Outputs on 4 pin power connector |
| Status LEDs | 2 x Mobile connection type. 3 x Mobile connection strength. 2 x Eth status. 1 x Power |
| SIM | 1 x SIM slots (Mini SIM - 2FF). 1.8 V/3 V. external SIM holders |
| Antenna | 2 x SMA for LTE. 2 x RP-SMA for WiFi |
| Power | 1 x 4 pin DC connector |
| Reset | Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing with DIN rail mounting option |
| Dimensions (W x H x D) | 100 x 30 x 85 mm |
| Weight | 247 g |
| Mounting options | DIN rail. flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 C to 75 C |
| Operating humidity | 10 % to 90 % non-condensing |
