/
Description
Teltonika Dual-SIM Gigabit Router (RUTX11)
Most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM. 4 x Gigabit Ethernet ports. Dual-Band AC WiFi. Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.
FEATURES:
- RUTX11 is a very powerful device equipped with Dual-SIM with auto Failover. Backup WAN. and other SW features.
- A wide range of internal hardware interfaces allows this product to be used in power-hungry industrial applications where speed and robustness are at the heart of the solution.
- 4G LTE – Cat 6 DL up to 300 Mbps in sync with 4 x 1 Gbit Ethernet ports allows for a seamless data transfer experience with auto-failover and a backup WAN.
- Bluetooth LE allows sensors to be connected directly to the router. thus minimizing the overall solution ecosystem.
TECH SPECS:
| MOBILE | |
| Mobile module | 4G (LTE) – Cat 6 up to 300 Mbps. 3G – Up to 42 Mbps |
| SIM switch | 2 SIM cards. auto-switch cases: weak signal. data limit. SMS limit. roaming. no network. network denied. data connection fail |
| Status | Signal strength. SINR. RSRP. RSRQ. Bytes sent/received. connected band. carrier aggregation. IMSI. ICCID |
| SMS | SMS status. SMS configuration. send/read SMS via HTTP POST/GET. Email to SMS. SMS to Email. SMS to HTTP. SMS to SMS. SMS auto reply |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White list | Operator black/white list |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock. Used band status display |
| APN | Auto APN |
| Bridge mode | Direct connection (bridge) between mobile ISP and device on LAN |
| WIRELESS | |
| Wireless mode | 802.11 b/g/n/ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band. MU-MIMO). 802.11r fast transition. Access Point (AP). Station (STA) |
| WiFi security | WPA3-EAP. WPA3-SAE. WPA2-Enterprise-PEAP. WPA2-PSK. WEP; AES-CCMP. TKIP. Auto Cipher modes. client separation |
| ESSID | ESSID stealth mode |
| WiFi users | up to 150 simultaneous connections |
| Wireless Hotspot | Captive portal (Hotspot). internal/external Radius server. built in customizable landing page |
| ETHERNET | |
| WAN | 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps. compliance with IEEE 802.3. IEEE 802.3u. 802.3az standards. supports auto MDI/MDIX crossover |
| LAN | 3 x LAN ports. 10/100/1000 Mbps. compliance with IEEE 802.3. IEEE 802.3u. 802.3az standards. supports auto MDI/MDIX crossover |
| BLUETOOTH | |
| Bluetooth 4.0 | Bluetooth low energy (LE) for short range communication |
| NETWORK | |
| Routing | Static routing. Dynamic routing (BGP. OSPF v2. RIP v1/v2. EIGRP. NHRP) |
| Network protocols | TCP. UDP. IPv4. IPv6. ICMP. NTP. DNS. HTTP. HTTPS. FTP. SMTP. SSL v3. TLS. ARP. VRRP. PPP. PPPoE. UPNP. SSH. DHCP. Telnet client. SNMP. MQTT. Wake on LAN (WOL). DLNA |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers. allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot. Wget reboot. Periodic Reboot. LCP and ICMP for link inspection |
| Firewall | Port forwards. traffic rules. custom rules |
| DHCP | Static and dynamic IP allocation. DHCP Relay. Relayd |
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination. service. protocol or port. WMM. 802.11e |
| DDNS | Supported >25 service providers. others can be configured manually |
| Network backup | VRRP. Mobile. Wired and WiFi WAN options. each of which can be used as an automatic Failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| SSHFS (optional) | Possibility to mount remote file system via SSH protocol (not available in standard FW) |
| SECURITY | |
| Authetication | Pre-shared key. digital certificates. X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via WebUI. unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
| Attack prevention | DDOS prevention (SYN flood protection. SSH attack prevention. HTTP/HTTPS attack prevention). port scan prevention (SYN-FIN. SYN-RST. X-mas. NULL flags. FIN scan attacks) |
| VLAN | Port and tag based VLAN separation |
| Mobile quota control | Custom data limits for both SIM cards |
| WEB filter | Blacklist for blocking out unwanted websites. Whitelist for specifying allowed sites only |
| Access control | Flexible access control of TCP. UDP. ICMP packets. MAC address filter |
| VPN | |
| OpenVPN | Multiple clients and a server can run simultaneously. 12 encryption methods |
| OpenVPN Encryption | DES-CBC. RC2-CBC. DES-EDE-CBC. DES-EDE3-CBC. DESX-CBC. BF-CBC. RC2-40-CBC. CAST5-CBC. RC2-64-CBC. AES-128-CBC. AES-192-CBC. AES-256-CBC |
| IPsec | IKEv1. IKEv2. with 5 encryption methods for IPsec (DES. 3DES. AES128. AES192. AES256) |
| GRE | GRE tunnel |
| PPTP. L2TP | Client/Server instances can run simultaneously. L2TPv3 support |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
| DMVPN | Method of building scalable IPsec VPNs |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| MODBUS | |
| MODBUS TCP SLAVE | |
| ID filtering | Respond to one ID in range [1;255] or any |
| Allow remote access | Allow access through WAN |
| Custom registers | Modbus TCP custom register block. which allows to read/write to a file inside the router. and can be used to extend Modbus TCP slave functionality |
| MODBUS TCP MASTER | |
| Supported functions | 01. 02. 03. 04. 05. 06. 15. 16 |
| Supported data formats | 8 bit: INT. UINT; 16 bit: INT. UINT (MSB or LSB first); 32 bit: float. INT. UINT (ABCD (big-endian). DCBA (little-endian). CDAB. BADC). HEX. ASCII |
| MQTT GATEWAY | |
| Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker |
| DATA TO SERVER | |
| Protocols | HTTP(S). MQTT. Azure MQTT. Kinesis |
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS. status. configuration. FW update. CLI. troubleshoot. event log. system log. kernel log |
| FOTA | Firmware update from server. automatic notification |
| SSH | SSH (v1. v2) |
| SMS | SMS status. SMS configuration. send/read SMS via HTTP POST/GET |
| Call | Reboot. Status. Mobile data on/off. Output on/off |
| TR-069 | OpenACS. EasyCwmp. ACSLite. tGem. LibreACS. GenieACS. FreeACS. LibCWMP. Friendly tech. AVSystem |
| MQTT | MQTT Broker. MQTT publisher |
| SNMP | SNMP (v1. v2. v3). SNMP trap |
| JSON-RPC | Management API over HTTP/HTTPS |
| Modbus | Modbus TCP status/control |
| RMS | Teltonika Remote Management System (RMS) |
| IoT PLATFORMS | |
| Clouds of things | Allows monitoring of: Device data. Mobile data. Network info. Availability |
| ThingWorx | Allows monitoring of: WAN Type. WAN IP. Mobile Operator Name. Mobile Signal Strength. Mobile Network Type |
| Cumulocity | Allows monitoring of: Device Model. Revision and Serial Number. Mobile Cell ID. ICCID. IMEI. Connection Type. Operator. Signal Strength. WAN Type and IP |
| Azure IoT Hub | Can send device IP. Number of bytes send/received. Mobile connection state. Network link state. IMEI. ICCID. Model. Manufacturer. Serial. Revision. IMSI. SIM State. PIN state. GSM signal. WCDMA RSCP. WCDMA EC/IO. LTE RSRP. LTE SINR. LTE RSRQ. CELL ID. Operator. Operator number. Connection type. Temperature. PIN count to Azure IoT Hub server |
| SYSTEM CHARACTERISTICS | |
| CPU | Quad-core ARM Cortex A7. 717 MHz |
| RAM | 256 MB. DDR3 |
| FLASH storage | 256 MB. SPI Flash |
| FIRMWARE / CONFIGURATION | |
| WEB UI | Update FW from file. check FW on server. configuration profiles. configuration backup |
| FOTA | Update FW/configuration from server |
| RMS | Update FW/configuration for multiple devices at once |
| Keep settings | Update FW without losing current configuration |
| FIRMWARE CUSTOMIZATION | |
| Operating system | RutOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell. Lua. C. C++ |
| Development tools | SDK package with build environment provided |
| LOCATION TRACKING | |
| GNSS | GPS. GLONASS. BeiDou. Galileo and QZSS |
| Coordinates | GNSS coordinates via WebUI. SMS. TAVL. RMS |
| NMEA | NMEA 0183 |
| Server software | Supported server software: TAVL. RMS |
| Mobile Network Geolocation | Get approximate device location on RMS based on mobile cell tower position (without using GPS) |
| Geofencing | Configurable multiple geofence zones |
| USB | |
| Data rate | USB 2.0 |
| Applications | Samba share. USB-to-serial |
| External devices | Possibility to connect external HDD. flash drive. additional modem. printer |
| Storage formats | FAT. FAT32. NTFS |
| INPUT/OUTPUT | |
| Input | 1 x Digital Input. 0 - 6 V detected as logic low. 8 - 30 V detected as logic high |
| Output | 1 x Digital Output. Open collector output. max output 30 V. 300 mA |
| Events | SMS. Email. RMS |
| POWER | |
| Connector | 4 pin industrial DC power socket |
| Input voltage range | 9 – 50 VDC. reverse polarity protection. voltage surge/transient protection |
| PoE (passive) | Passive PoE. Possibility to power up through LAN port. not compatible with IEEE802.3af. 802.3at and 802.3bt standards |
| Power consumption | 16 W Max |
| PHYSICAL INTERFACES (PORTS. LEDS. ANTENNAS. BUTTONS. SIM) | |
| Ethernet | 4 x RJ45 ports. 10/100/1000 Mbps |
| I/Os | 1 x Digital Input. 1 x Digital Output on 4 pin power connector |
| Status LEDs | 4 x WAN type LEDs. 2 x Mobile connection type. 5 x Mobile connection strength. 8 x LAN status. 1 x Power. 2 x 2.4G and 5G WiFi |
| SIM | 2 x SIM slots (Mini SIM - 2FF). 1.8 V/3 V. external SIM holders |
| Power | 1 x 4 pin DC connector |
| Antennas | 2 x SMA for LTE. 2 x RP-SMA for WiFi. 1 x RP-SMA for Bluetooth. 1 x SMA for GNSS |
| USB | 1 x USB A port for external devices |
| Reset | Reboot/User default reset/Factory reset button |
| Other | 1 x Grounding screw |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing with DIN rail mounting option |
| Dimensions (W x H x D) | 115 x 44.2 x 95.1 mm |
| Weight | 456 g |
| Mounting options | DIN rail. flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 C to 75 C |
| Operating humidity | 10 % to 90 % non-condensing |
| Ingress Protection Rating | IP30 |
| REGULATORY & TYPE APPROVALS | |
| Regulatory & Type Approvals | CE/RED. RoHS. REACH |
| Vehicle | ECE R10 (E-mark) |
| EMI IMMUNITY | |
| Standards | EN 55032:2015. EN 55035:2017. Draft ETSI EN 301 489-1 V2.2.1. ETSI EN 301 489-3 V2.1.1. Draft ETSI EN 301 489-17 V3.2.0 |
| ESD | EN 61000-4-2:2009 |
| RS | EN 61000-4-3:2006+A1:2008+A2:2010 |
| EFT | EN 61000-4-4:2012 |
| Surge protection | EN 61000-4-5:2014 |
| CS | EN 61000-4-6:2014 |
| DIP | EN 61000-4-11:2004 |
| RF | |
| Standards | ETSI EN 300 328 V2.1.1. ETSI EN 301 893 V2.1.1. ETSI EN 300 440 V2.1.1 |
| SAFETY | |
| Standards | IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017 |
